To use toll control with pin: Pick up receiver, listen for dial tone,
*20---*49
Speed Calling Routine
Home Intercom
*53
Pattern B
*54
Pattern C
*55
Pattern D
*60
SCR-Screen List Edit
*66
Automatic Call Back
To activate: after you dial a busy number hang up, then pick up receiver and dial *66 if the line is still busy,
listen for 3 beeps and hang up. You will hear short-short-long when the line is free. Your call will be
automatically made when you lift the receiver.Note: when auto call back is active you may still make
and receive other calls. After 30 minutes your request will be cancelled.
*69
Automatic Recall
To activate: pick up receiver and dial *69, listen for announcement that will tell you the party that last
called you. If you wish to return the call press 1. Note: there is no time limit for returning missed calls
however you will only be able to return the last incoming call you received.
*70
Cancel Call Waiting
To cancel call waiting before making a call.
Pick up receiver, dial *70, listen for three beeps and a steady dial tone, dial #
*72
Call Forward Activation
To activate call forwarding. Pick up receiver and dial *72, dial phone # calls will be forwarded to,
press # and listen for 3 beeps, hang up.
*73
Call Forward Deactivation
To deactivate call forwarding.
Pick up receiver and dial *73, hang up.
*78
Telemarketer Do Not Disturb Activation
To activate telemarketer do not disturb.
Pick up receiver, dial *78, hang up.
*79
Telemarketer Do Not Disturb Deactivation
To deactivate telemarketer do not disturb.
Pick up receiver, dial *79, hang up.
*82
Allow Delivery
If you have an unlisted phone number and you are trying to call a party that does not accept blocked calls.
After you hear dial tone dial *82, after 3 beeps, dial the number.
*86
Automatic Callback
To cancel automatic callback
Pick up receiver and dial *86, listen for tone and hang up
*89
Automatic Recall
To cancel automatic recall: pick up receiver and dial *89, hang up.
Access Codes/Directions Call Forwarding –
To activate dial *72, listen for tone, dial the number you wish calls to be forwarded to, after receiving the confirmation tone, wai 4 seconds for call to complete.
To restore normal service, dial *73, 2 bursts of dial tone indicates that the condition has been removed.
When call forwarding is in effect, your telephone will ring once each time your number is dialed, but you can not answer it.
Call Waiting
You are notified by a burst of tone, tap your hookswitch or flash key to place original call on hold and answer incoming call, a second tap or flash reconnects you to original call. Subsequent taps or flashes will switch you from one call to the other.
Three-Way Calling
Tap your hookswitch, listen for 3 bursts of dial tone, dial number of third party. If third party does not answer tap your hookswitch to return to original call. When the third party answers, tap your hookswitch to set up a three-way conference. If either of the other two parties hangs up first, you will still be connected to the remaining party. If you hang up first all connections are released.
Telemarketer Do Not Disturb
To activate dial *78, hang up.
To cancel dial *79, hang up
To set or change pin dial #87 or *10 then enter pin
